How to use a DTF printer to customize patterns on clothing?
1.Prepare the design you want to print and import it into your printing software. Send it to a DTF printer for printing.
2.The DTF printer prints the design onto a transfer film.
3.High temperature fuses the hot melt adhesive with the design.
4.Hot melt adhesive is applied to the back of the printed film.
5.Cut the printed film. Lay the garment and the film flat on a heat press.
6.Turn on the heat press, press down, and wait 15 seconds.
7.Open the heat press and peel off the transfer film.
8.One garment is now printed.
